Brief Introduction:
Alarm can be set for motion detection or door/window sensor, or both (user selectable)
Wireless - simple installation
Mount alarm using 3M Tape (included) or Hardware Mounting Kit (included)
30-seconds entry and exit delays prevent false alarms
Create your own four digits security code
Automatic reset once motion is no longer detected for 30 seconds
Motion detection range about 20 feet (6m)
Technical Parameters
| Power Voltage | 12V DC, with dry battery model: 23A |
| Standby Currents: | ≤5uA |
| Alarm Current: | ≤10mA |
| Wireles Transmitting Distance: | noninterference ≥200m ; indoor about 30~50 m |
| Wireless Transmitting Frequency: | 433.92 MHZ ± 2KHZ or 315 MHZ |
| Power | standby :0.01W, Alarm :0.09W |
| Emitting frequency | >10mw |
| Operating Temperatue: | less than 95% |
| Transmitters Size: | 90 mm(L)×55 mm(W)×22 mm(H) |
Installation:
Code preset by factory. If not, please follow the following code diagram to play it by clamp
Metalized magnetic part: It should be installed in the motion door and keep it parallel with the side of the base.
Metalized reed pipe: It should be installed on the floor by screws, and keep it at the same level and parallel with the metalized magnetic part, the distance between two parts no more than 2cm.
Wireless emitting sensor: There is a wire connected with the metalized reed pipe, and must keep within the receiving area, the signal wire should be installed along the floor. For example, if you are on the 8th floor, but your garage is on the first floor. You can install the wireless emitting sensor in your home, and extend the wire into the garage.
Open the cover of transmitter, fix battery in proper and than cover it.
Test it: put two metalized parts close and than open it. If the signal LED flashes, it means normal work.
After installation, open the door, the signal LED flashes about one second, it means installing completed
- Be used to detect rolling door if it is illegal opened or moved, It is one of the ideal solutions for providing concealed protection for tight spaces, especially for Shutter door.
- Easy installation, power saved, non-false alarm
Why Choose Us?
1. HongAnKe is a factory with own engineer team and production lines.
2. 10 years experience is the security fields.
3. 100% test of products.
4. OEM / ODM acceptable
5. Honest and Quality is our faith.
Payment Term:
Bank Transfer (T/T)
